Arkadaşlar merhaba k-3 te debug menüye girebilmek mümkünmüdür.bunu bilen arkadaş varmıdır acaba ben pentax forumda aşağıdaki yazıyı buldum ama ingilizcem olmadığı için çeviriden pek bişey anlayamadım.en azından iniglizcesş olan arkadaşlar burdan birşey çıkartabilirlermi.
I opened my K-3 in Debug Mode. Changed the Region Setting from 01 to 02 and got only English and three asian languages. Set it back to 01 and I now got the possibility to set Swedish again.
Do almost as stated below: Enter Debug Mode, DO NOT REMOVE THE FILES as stated below. Turn camera off and On again.
Choose Region 01 and press OK, open the menu and Wrench 1 and check the languages avalible. Choose your language.
Turn the camera off, remove the files. Turn on and go to "secret menu" where you can disable the Debug Mode.
Turn off and on again. The Debug Mode should have been turned off and you will not see the text "Debug Mode" on the LCD (The LCD needs to be turned on to show the text)
and you will not see the secret menu anymore.
I have tested setting Region 00, 01, 02 and 03.
The K-3 Debug Mode
This is how you enter:
Create 2 files in the root of SD card (Make sure your computer shows the file endings, i.e .txt, .PEF, . JPG etc)
00077760.502
DEVELOP.MOD
Open and add the text [OPEN_DEBUG_MENU] to the first file.
Insert the SD card in slot 1 and turn on the camera without closing the card door.
Enable Debug Mode and press OK. You can now remove the files.
In the Menus, before the C1-menu, you now will find a hidden menu.
DISCLAMER: YOU DO THIS AT YOUR OWN RISK SO READ ABOUT THIS ON THE INTERNET.
JUST ENTERING THE DEBUG MODE SEEMS HARMLESS THIS FAR AND I HAVE USED IT MANY TIMES TO ADJUST THE AF ON MY OLDER CAMERAS THAT DID NOT HAVE THE FINE TUNING THE K-3 HAS.
THERE ARE MANY SETTINGS I HAVE NO IDEA WHAT THEY DO...
Read more at:
http://www.pentaxforums.com/forums/172-pentax-k-3/265668-international-language-settings-k-3-a-2.html#ixzz3cUbGs4Wm
İletileri Göster
